Hopper修订版：Nerf Atlas 3D模型

Hopper for Nerf Atlas - revised

2024-02-04 13:07:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I revised the hopper on speardancer's Nerf Atlas hopper mod to utilize M3 brass inserts since they never specified what hardware their mod is using. I love brass inserts. I also added some lines in either side of the hopper to allow a user to view the ammo within. I could have added some to the top too but I'm satisfied with how it turned out. Use the original tube and adapter with these hopper parts to complete the mod.

Print side-down to minimize supports.

The tube and hopper don't fit snugly together. Not sure if it's an issue with my remake or present in the original design. It leaves a gap in the hopper but does not affect functionality. The adapter and hopper fit well together after a bit of sanding.

I also reversed the screw direction for the cap but the original cap's dimensions didn't fit so I ended up not using it. Instead, the gaps I added are perfect to tie an elastic cord through, allowing a quick and easy way to load rounds without them falling out.

All in all an excellent design which will help make your Atlas more viable and interesting.