xTool机箱用6寸导管适配器

6" duct adapter for xTool enclosure

2024-01-17 09:37:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I already had an inline fan that used 6" ducting and the fan that comes with the D1/D1 Pro enclosure isn't powerful enough anyway. This part will bolt onto the enclosure using the nuts and bolts provided with the enclosure. I put the bolts in with the heads on the inside of the enclosure to reduce interference. You can then stretch your ducting over the larger end and clamp if needed. Leave a comment if anything needs fixing.

Link to onshape file if you want to make edits: https://cad.onshape.com/documents/a1870ebcf494b901ac85f49f/w/8e45ff6d994fc807962cac3a/e/b4d1f920e072366c34b938d3?renderMode=0&uiState=65a72f74bf044f41b7a8367c