干燥架 Solvol 线绳盒储物系统

Solvol Filament Dryer Box Shelf System

2024-01-17 07:26:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The original idea for this came from @TheDOJ https://www.printables.com/model/377542. But after several failed prints due to mainly me getting fed up trying to figure out the correct interference fit I thought sod it and went and redesigned my own shelving system from the bottom up. So all that poor old @TheDOJ was left with from the original was the name.

I wanted to have the filament dryer orientated front to back so that the filament ran smoothly into the Runout Sensor and DOJ's version ran laterally and the filament kept getting jammed.

Also, I added slots at the bottom of the shelf to aid with affording what I felt was improved ventilation away from the dryer. I also added sides to the shelf to prevent the dryer from falling onto the print bed which again sadly @TheDOJ's version did too frequently.

I added cutouts on the bottom of the shelf to allow for Command-style velcro strips to be used so that I could mount my LED lights in whichever orientation I desired.

There are screw holes in the bottom of the base to take M3 screws which screw into heat-pressed screw threads to secure the shelves and brackets, again to prevent the shelf from falling onto the print bed below.

I used the following print settings

The brackets need to be orientated so that the brace arms are on the bed surface otherwise supports would need to be introduced.
Supports would be needed in the Shelf for the LED light strip recess and the slots for the Brackets
Prusaslicer High Detail Setting for my PLA+

Nozzle: 0.4mm
3 walls
2 top/bottom layers
15% Cubic infill

Weight: 120.05g

Est. Cost £7.16

Time 2 days 17hrs 41 Mins

Added various file formats in case anyone wants to modify it.

STL, STEP, f3d, 3mf

f3d: Fusion 360

3mf: OrcaSlicer.