加拿大皇家空军雪鸟队喷气式飞机（CT-114训练机）底部视图

RCAF Snowbirds Jet (CT-114 Tutor) Bottom View

2024-01-17 05:44:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Canada's RCAF 431 Air Demonstration Sqn "Snowbirds" is a 9 jet air demonstration team using the Canadair CT-114 Tutor jet.

There are 2D larger prints and small 2D fridge magnet prints. Have not printed the large ones yet.

Used the bottom profile because of the distinctive white logo against the red.

Looks good on a white fridge. For use on stainless steel or other colored fridges, I included a filled in profile back ground to be printed white and glued to the magnet side.

Magnets: 6 x 2 mm. (Actual size of my magnets was 6mm x 1.71mm) The magnet holes are 6.2mm x 2 mm deep. Tight fit. A small drop of super glue. Used needle-nosed plyers to squeeze the magnets in.

The diagrams of Formation the Snowbirds fly can be found on their official website. Search Snowbirds Formation.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
30%
Filament brand:
eSun
Filament color:
Red
Filament material:
PLA+
Notes:
Print with the magnet holes facing down. This give the better finish on top. No supports are needed for the small hole.