Falcon RPM八旋翼无人机TPU部件

Falcon RPM Octocopter TPU Parts

2024-01-16 10:19:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

All the required parts for the Falcon RPM Octocopter frame. All Falcon RPM prints and mounts are also compatible.

-6mm or 8mm FPV camera mount (depends which arm thickness you picked)
-Triple SMA mount with swappable and adjustable GPS mount
-Matek SAM M8/10 GPS mount (8 and 10 fit the same)
-Matek M8/10Q-5883 GPS Mount (8 and 10 fit the same)
-RX mount for front stack behind FPV camera
-New universal GoPro mount
-Landing Gear Medium (perfect length for top and bottom mounting of motors. Comes in a pair, one front one back, print twice for the required four. Zip tie to underside of frame)
-Landing Gear Runner (connects landing gear at the bottom, print x 4, interlocks into a square using zip tie holes.)

Add more walls to the print and higher infill for parts that require more strength.
For FPV camera mount use at least 4 walls and at least 80% infill for strength and camera protection.