小型架子电力支撑结构

MiniRack Power Mount

2024-01-14 15:30:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

MiniRack Power Mount

This component is a modular part for use with the MiniRack Base.

Compatibility

This component was designed to accomodate this Mountable Power Extension for supplying power to racked equipment, and spans two rack units by default.

Be sure to note the rated power in the Product Description section of the product's page.

Customization

MiniRack uploads include the source Fusion 360 design files. Dimensions have been meticulously parameterized to allow customization of rack dimensioning. Relevant parameters can be found in the User Parameters area of Fusion 360.

Materials

Mountable Power Extension
2x M3*10mm Machine Screws
2x M3 Nuts
4x M3 Washers (optional, but recommended)

Assembly

This component is designed to be mounted to the rear MiniRack rails.

To secure the outlet to the component, run a machine screw through a washer, the front plate of the outlet, and through the slot in the Power Mount component. Place a second washer on the end of the protruding bolt, and then tighten down a nut on the end of the bolt. Repeat for the other side.

The outlet's power cable should be run out the back of the component.