简化版货架基础模型

MiniRack Base

2024-01-14 14:04:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

MiniRack - Miniature Modular Racking System

Purpose

This system was born from a desire to create a way to mount various equipment in a similar way to a conventional 19-inch rack on a smaller scale while still maintaining adherence to as many applicable standards as possible.

Schematic/Dimensions

Dimensioned part drawings have been provided in the images section. The default width and depth of the MiniRack is 8 inches, with the height dependent on the size of rail selected.

Be mindful of the rail clearance when selecting rails for mounting bases. If necessary, adjust the rail clearance as detailed in Customization to accomodate irregular rail thickness.

Relevant Standard(s)

The MiniRack adheres to the vertical spacing dimensions outlined by EIA-310-D. This specification details the way mounting holes are arranged on rack rails and compatible equipment to ensure interoperability.

While the MiniRack's default horizontal spacing has been altered from specification to achieve the goal of a smaller scale, the provided Fusion 360 files include parameters to alter the horizontal scale as desired.

Customization

MiniRack uploads include the source Fusion 360 design files. Dimensions have been meticulously parameterized to allow customization of rack dimensioning. Relevant parameters can be found in the User Parameters area of Fusion 360. Given a sufficiently large 3D printer, a standard 19-inch rack could conceivably be created with minimal adjustment.

Assembly

Rack rails and appropriate mounting hardware will need to be acquired prior to assembly. These can be fabricated as outlined by the specification or purchased from a retailer. When planning an assembled rack, note that the top and bottom 1U sections will be occupied by the rack bases, leaving the rack with n-2 unoccupied sections for equipment.

Gator Rackworks manufactures a few quality sets and related mounting hardware at reasonable prices and are recommeded for this project. Note that you will need 2 sets (4 rails) for all corners of the MiniRack.

Two rack bases are recommended for stability, one for the top and one for the bottom. Each base will provide a mounting point for the ends of each rack rail. Use mounting hardware appropriate for the rails in use to fasten all sets of MiniRack Base slots to the 1U sections on the rack rails. Slots were used in the design to allow for horizontal flexibility and prevent strain/tension on the rack rails. Refer to provided images for more information.