Gridfinity 花瓶款式容器

Gridfinity Vase Mode Bins

2024-01-14 05:42:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are parametric vase mode Gridfinity bins. I exported a few sizes as .stl, but you can adjust dimensions and height in the Fusion 360 file. Just change the user parameters Num_X, Num_Y and Height. In order to print the foot in vase mode, which normally wouldn't be possible, you need to change the bottom layer number to 29 at a layer height of 0.2 mm in PrusaSlicer (see screenshot). I did NOT test this in any other slicer, so I can't tell you if this works. You may also need to adjust the wall thickness if you are using a different extrusion width. I have not tested it with very wide extrusions.

Have fun!