1997福特Ranger后备扬声器快速适配6x8至6.5版本1
97 Ford Ranger Rear Speaker Quick Adapt 6x8 to 6.5 Vers. 1
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Quick Simple 6x8 to 6.5 Rear Speaker adapter for my 97 Ranger Reg Cab, Many Others Cars as well just make sure you look first.
2 needed, this also offsets the speaker higher or lower in the grill, centered not needed.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Supports:No
- Infill:Basic Cura 5.6.0 Profile for Ender 3 V3 SE add supports
- Filament brand:
ESUN
- Filament color:
Black
- Filament material:
Pla+
- Notes:
You should add a support where the Larger raised hole is, there is a gap under it to let it slide on the speaker screw post, twist on its a bit snug to keep it i place and firm. Print settings are just basic profile.
How I Designed This
Alpine 6.5 Type R's
Keep it simple stupid, needed to quickly adapt 6.5 Alpine type R's that I had to a 6.8 speaker grill and hole. This speaker has a wide footprint but you can still push it in the hole and remove it.
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
Na Miata 240SX 原厂经典车型 + 后灯装饰插件2023-05-10 -
WaS_UK_N-class_destroyer2023-05-17 -
Wled控制器箱2023-08-25 -
JBL Partybox 310 3D脚垫橡胶脚侧用型号2023-09-09 -
头发修剪架2024-01-10
最热下载
-
MK47 模组道具枪2023-03-26 -
Makita 10.8V 钻具与电池组2023-04-07 -
佳能EOS镜头连接接口2024-01-11 -
手指机器人MX版2024-04-14 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
3d打印全向自行车（部分金属在文件里面包含CAD图纸）2025-07-25 -
模块化笔筒链2025-07-19 -
HGX lite v2支架2025-07-18 -
系带3D凉鞋（儿童款）2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24