Aquarium Sand Sifter

2024-01-07 00:50:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Handle stem and base have a press in fit when I print them, they would be made permanent with glue for whatever material you print, but honestly the glue probably will not fit without manual scale adjustment.

I printed all files at 59% size for a 5 gallon aquarium with a sand substrate. I disabled uniform scaling when printing the middle part and extended the Z to suit the length I needed.

To assemble, just firmly press the middle into the sifter, and then press the handle onto the middle. At my printed 59% size, and for aquarium sand, it seems strong enough for regular use. Permanent and stronger fixture could probably be accomplished using a small machine screw and nut, and drilling an appropriate hole through the overlapping joints.

I use this to sift out old snail shells and various other debris from my 5 gallon sand substrate aquarium.

Thank davedelay for the sifter, I just adjusted it for my needs!

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 2S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
20
Filament brand:
eSUN
Filament color:
Matte Black
Filament material:
PLA

How I Designed This

I took the STL files from davedelay into Blender, cut off the hand handle using the boolean modifier and a generic cube, added my own stem, duplicated the attached stem to be used as the middle and handle parts, and reduced the middle's size to use the boolean modifier on the attached stem and handle. I joined the attached stem part to the sifter part and then exported each piece as a separate STL file.

Aquarium Sand Sifter

朋友，你觉得上面这个模型，属于下面的哪个分类？