摇滚风格3D模型

Rocker

2024-01-06 14:19:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Small wooden-style rocker, loosely modeled after an image search, no particular scale. Seat is about 2.5" wide, Overall height about 4.5", rockers just under 4" front to back.

Print Settings

Printer brand:
Afinia
Printer:
AFINIA H800
Rafts:
No
Supports:
Yes
Infill:
20-30%
Filament brand:
Hatchbox
Filament material:
ABS used
Notes:
Needs 2 rockers, 2 arms, 2 spindles, 3 slats, 1 seat, 1 head.

Arms printed with top side down, slats flat, rockers on their sides, seat flat, head standing on bottom, and spindles vertically.

Ergo shaping on face of seat will give visible steps. Stand it vertically if desired, though that will use a bit more support on the large corner rounds.

If you're impatient like me and remove short parts while still printing longer parts, do yourself a favor and print the spindles separately, or risk knocking them over.

Post-Printing

Sockets in head, spindles, and seat are oversized .005" all around. I assembled with medium CA: rockers to seat, arms to spindles, spindles and slats to seat, head to spindles and slats.

摇滚风格3D模型

朋友，你觉得上面这个模型，属于下面的哪个分类？