3MF标准罐式水烟锅

3MF Standard Mason Jar Bong

2023-09-08 03:11:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

3MF version. Needs a specific fitting, they sell them.

For clarification, the bottom is not completely flat, it is concaved on the edges like a normal mason lid.

This is an effort to improve the Mason Jar Bong concepts with a curve on the tube.

All you need is a 70mm mason jar and a 9mm bowl piece.

9mm bowl piece
https://www.thingiverse.com/thing:6151778

The only mirroring, I used was the measurements and I reassembled a 9.45 cylinder quarter for a 9.45 cut but the actual model I did not use mirroring on. There was some seeming criticism so I've been further experimenting.

If you want to make a pipe like one of mine the hole for 9mm is 9.45mm. I am pretty sure it needs .335 to break even and an extra .215 to slide without excess friction.

https://youtu.be/YmSp3y6XctI

note: I am really glad I didn't give this pipe a name [becuase it's only half the bong] but if you were to call it something as a short it would be a periscope.

The smaller the lid clearance for its lip the better. This is the only size I can fit everything without the bowl piece intersecting with the mouth tube.