二氧化碳气罐弹匣3D模型

CO2 Cartride Mount

2023-09-07 22:15:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Holder for a 16g CO2 cartridge to be mounted under a bottle cage. It's a two-part design to utilize the strength in the XY-plane of the printed parts so they won't get damaged by the bolts of the bottle cage or the tension from the rubber band that holds the cartridge. Additionally, there's a matching screw cap (3/8 24 thread).

I've designed this to fit snugly on the seat tube of my Factor Ostro in combination with the Black Inc bottle cage, but I'd guess it would also fit other frames with slender (aero) seat tubes. I've uploaded the .stp-files for you to modify!

Disclaimer: While I provide all data and information to the best of my knowledge, I take no responsibility for any damage - whether to your accessories, bike or body! If you choose to install printed parts to your bike, that's entirely on you!

Post-Printing

Slide part #2 through the slot in part #1 and rotate until it unti it sits centered in the groove.
I've used a dab of epoxy glue to fix its position there, but that's not essential (given your rubber band holds everything tight enough).