Elegoo Mars Mate空气净化器灯罩

Lights Cover for Elegoo Mars Mate Air Purifier

2023-09-07 17:32:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a cover for the light of the Elegoo Mars MAte Air Purifier.

Why? Let me explain...

I've put an Elegoo Saturn 3 Ultra in a Snapmaker Enclosure, mainly to prevent the resin smell saturating and oozing in every crevice of the room.
Unfortunately this means that the printer cover can no longer be used, but actually now saves me the hassle of removing it constantly.

In this enclosure I have also put a Elegoo Mars Mate Air Purifier, to absorb the smell and reduce it to a minimum when I'm not using the printer and have covered the resin tank with my Tank Cover : https://www.thingiverse.com/thing:6203751

I noticed that on the top of the build plate the resin was gelling...strange, I have never seen that before...than it occurred to me that the lights of the Air Purifier were quite bright and reflecting via the ceiling of the enclosure and slowly curing the resin....wonderful ;-)

I've added 3 versions: a boring one, and 2 with a spiral on top, either added or subtracted.

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO SATURN 8K
Rafts:
No
Supports:
No
Resolution:
.005
Infill:
100%
Filament brand:
3Djake
Filament color:
Tough Blue
Filament material:
resin
Notes:
Use a non-transparent and dark resin or filament.

Best position for resin printing seems to be on one of the short sides.
I've tried the longer side and 45° with supports, but these gave fitting issues.