万能滑动臂护具
Vannystyle Skid Arm Protector
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Clips on without bolts, can add a Ziptie or Electrical tape for extra security where the skid extends down the arm a little, so you can fully tighten your motor screws to the carbon and not have to bolt through TPU and have loose motors
Print with 2 wall layers and 3 top and bottom for a softer lightweight skid, or if you dont mind a little extra weight then feel free to bump it up a bit. they weigh 3.85g each with the described settings
Print Settings
- Printer brand:
Creality
- Printer:
CR-X
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:10%
- Filament brand:
esun
- Filament material:
TPU
- Notes:
Print with 2 wall layers and 3 top and bottom for a softer lightweight skid, or if you dont mind a little extra weight then feel free to bump it up a bit. they weigh 3.85g each with the described settings
License
Vannystyle Skid Arm Protector
by driftingS13 is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
老板螃蟹 KGC-0102023-09-08 -
空气软枪缓冲管板 (AEG, 后置连接木制部件)2024-01-03 -
自行车钥匙扣2024-01-05 -
记录保持者（当前播放记录展示）2024-04-13 -
Smallrig F40 跟踪焦点齿轮2024-04-23
最热下载
-
MK47 模组道具枪2023-03-26 -
天眼6x30寻星器引导摄像头M42适配器2024-03-20 -
硫化机模型2024-04-13 -
手指机器人MX版2024-04-14
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
用于HGX Lite的MBOT3D MK2混音版2025-07-18 -
天使和恶魔2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16
