Dust Collector Slide Valve Assembly

2023-08-19 06:40:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I purchased an older dust collector for wood working and the suction slide valve assembly broke. So I created my own version with pieces that slide onto each other so that if something breaks again, it is easily re-printed withing a day and back up and running.

Print Settings

Printer brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
.20
Infill:
30
Filament brand:
Eryone
Filament color:
Black
Filament material:
PETG
Notes:
These were settings I used. Not all parts required supports, just the valve assembly block. The others i oriented to not need supports.

Post-Printing

Once all parts are printed, the slide stop glues to the slide. There is a slight cutout for where it goes. Super glue or a good plastic glue is good. Once dried, set the slide assembly onto the slide valve body, and the slide valve cover glues to the body with the slide in the middle to lock in the slide and the stop is withing the radius of the vacuum port. Once glues, it should slide freely, but not bind. The rest should be self explanatory.

How I Designed This

I concepted the design with Plasticity, taking the critical dimension diameters of the parts I specifically adapt to. Large port is 4", my hose was 62mm, so i threw in the 100MM to 62MM adapter piece just in case. You can always resize these as needed if you are good with CAD software.