气囊工具 - 8凹槽设计 - SUP - RAFT - KAYAK
Valve Tool For Inflatables - 8 Notch - SUP - RAFT - KAYAK
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I needed a tool to adjust or remove an 8 slot valve from my Stand Up Paddle Board. I found 6 notch versions on thingiverse, but nothing for an 8 slot valve. I pulled out the caliper, FreeCad and made this. It works great for me.
I printed in PETG but I'm sure PLA would be fine. Just print with a greater infill (~30% for me) and an infill with good horizontal strength, I used tri-hexigon in Cura. I think I printed with .16 layers, but .20 would probably be good enough.
Tags
License
Valve Tool For Inflatables - 8 Notch - SUP - RAFT - KAYAK
by mj_at_maker is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
![[SCAD] 喷雾罐杆延伸部的画笔或扫帚柄接口](https://www.3dsjs.cn/api/utils/resourcehub?time=1777842373&url=http%3A%2F%2Flocalhost%3A9898%2Fsandsjs%2Fimage%2Ff%2Fc%2Ffc39ebaf0e22aa2f85ddfa40d2becf8e.webp&signature=bf74606d15f4425eda106feec4dcdc7c)
联系我们
热门推荐
-
压缩袋真空适配器2023-03-27 -
WaS_UK_N-class_destroyer2023-05-17 -
Dew Shield for Evoguide 50ED2023-08-07 -
Arduino继电器模块外壳2024-01-14
最热下载
-
Phalanx S1 数字化STL文件 3D打印Nerf枪型号2023-03-26 -
车身RC 1/10 全套2023-03-26 -
佳能EOS镜头连接接口2024-01-11 -
硫化机模型2024-04-13 -
Ikea 米兹顿 插嵌2024-04-20
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
性感美女3d人像（带基座）2025-07-17 -
裸女站立2025-07-16