门锁款式, 面包车

Latch Lock for Doors, Van

2023-08-07 18:53:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hehyo

A few years ago I designed a locking system for my friend's van.

Now I've redesigned it so it doesn't lose itself and is more durable. The old ones didn't break and even lasted for several years when printed in PLA, but it was time to improve them!

The design is suitable for wood with a thickness of 6.5 - 10 mm and holes with a diameter of 8 mm.

Explanation of the parts:

The levers have different lengths (from 6.5 - 10 mm). Choose the one that fits the thickness of your wooden boards. I used 6.5 mm multiplex wood for the trolley.

In addition to the printed parts you will need one M4 cheese head screw and optionally one M4 nut per lock.

Levers 6,5 & 7 mm: 25 mm M4 screw + knob M4
Levers 8,5 - 9,5 mm: 30 mm M4 screw + knob M4
Levers 7,5 , 8 & 10 mm: 30 mm M4 screw + knob M4 !!!big!! or you shorten the screws to approx. 28mm

Buttons: you can choose between a printed thread or you can insert a M4 nut into the button during printing. The large knobs fit all lever models - the narrow ones may need shortened screws (as described above).

Stop: If you need a stop to keep the lever in the closed position, you can mount this part with a 3 mm wood screw. I did not need it on my model (gravity pulls it down).

Printing instructions:

I printed the parts with ASA 0.2 mm layer height, 0.6 mm nozzle, 3- 4 perimeter and 25-50% infill.

I have also designed a larger and slightly different version of this for larger doors. I will revise this design and upload it soon as well.

Have fun and keep printing!