强力 Velcro 皮带固定器

Strong Velcro Strap Holder

2023-08-05 02:38:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Yesturday I helped a good friend to improve his Camper.

Therefore I printed some Velcro holders to mount the Solar Panel & its Cable securely to a wall. The holders are for different widths of velcro and very strong. (I hang myself onto them as a test :D)

There are 3 different sizes.

Small: For Velcro Bands up to 14 mm width.
Medium: For Velcro Bands up to 22 mm width.
Large: For Velcro Bands up to 30 mm width.

To mount the holder I recommend using 3,5 mm wooden screws. Always make sure not to not to overdo it when tightening the screws.

In the Car I used ASA Filament, 0,3mm layer Height, 0,6 mm Nozzle, 3 Perimeter & 25% infill.

Annother feature of this design is that the excess cable can be put in between the holder and the wall. So it will not open accidentally and look a lot cleaner. You also may take a very long strap and cycle it around several times this way.

Also the design is not only designed for cable management but can also withstand heavier tasks like storing tools.

Have fun and keep printin!

BTW: I designed other holders too for the electricity that I will release soon.