Dell Precision T5610系列风口贝叶（适用于5.25英寸光学贝叶）

Dell Precision T5610 Ventend Bezel for 5.25 optical bay

2023-08-04 21:57:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Dell Precision T5610系列风口贝叶（适用于5.25英寸光学贝叶）

Summary

This is specifically for the Dell Prevision T5610 workstation tower.
It fits in the 5.25" optical bay and is used for when you want more airflow, add fans or the HDD cage (which has a fan).
I don't know about the other similar Precision towers (e.g. T3000 series, other 5000 models, or 7000 series), but you could give it a go - it's not much time or plastic.
You can glue some dust filter mesh on the inside if you like.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1
Infill:
10%
Filament brand:
Any
Filament color:
Any
Filament material:
PLA+
Notes:
Print flat side down. Use tree supports 'everywhere' (i.e. not just touching build plate) because of the right-angle tab and be careful when removing them.
If installing from the inside of the case, it should just snap in.
If installing from the outside of the case (which is what I did) it'll be a tighter fit - put the bottom tabs in first (depending on how food your printer is, you might need to shave the two tabs into points, so they fit in the slotted tabs, as poorly calibrated printers will squash the tabs and they won't quite fit the slots - use a sharp knife/blade or a bevel tool) in first and then you may need to press down on the top tab with a flat-head screw-driver or whatever you have carefully to get it in.