啤酒杯 - Chmielaki 2023

Beer Mug - Chmielaki 2023

2023-07-24 23:02:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My Unofficial Beer Mug for Chmielaki 2023 (Beer Festival in Krasnystaw, Poland)

More photos:
https://www.instagram.com/p/CvFZJU3t890/
https://www.instagram.com/p/CvHzweLt9WT/

With stainless steel inserts:
https://www.instagram.com/p/CvM5YA8NORH/

Printing timelapse:
https://www.instagram.com/p/CvHCn-POASK/

Render + texture settings
https://www.instagram.com/p/Cu1KyGstNGc/

Version 2022
https://www.thingiverse.com/thing:5463725

It was made to be used on festival to drink beer sold in 0,5l plastic cups - mug printed in 120% size.
Easier to use than a cup and safer to use than drinking from a print
Buy a beer, put plastic cup in the mug, drink, throw out plastic cup, buy another beer ;)
You can also use it with bottled beer (100% size), beer can (94%) or just for a decoration
One photo is with 0.5l stainless steel inserts. Mugs were printed in 116% size then

Fits standard diameter beer bottle (there is a 72mm hole)
You can resize the model in slicer for different diameters
Use the equation:
*X / 72 100%**
where X stands for the diameter you want with added 1-2mm (for a 'safe distance')
So for example for a beer can (66mm, so X will be 68) you need 94,5% size
Remember to check the widest area (like the bottom of the bottle or top of the cup under the rim)

Mug is with two coat of arms versions
'sticking out' (1convex) and 'carved in' (2concave) - see one of the renders

Additionally there is a V1.1 version with more clean wood texture and some small changes

Printed on Voron 0.1 with Wood PLA from Sunlu and Stone Age Dark PLA from Spectrum Filaments
and on JG Maker A1 with Metallic Emerald magicPLA 3D Jake

Models made in Blender 3D
The city coat of arms is from 2022 version with small changes
Barrel texture is made with nodes. See my Instagram post (link above, render) for my settings in Blender 3D to generate such texture

Update 04 VIII 2023
Added V1.1 version with more clean wood and some small changes
Shorten file names

Print Settings

Notes:
Printed with 0.4 and 0.6mm nozzles
0.2-0.3mm layer height
2 walls (perimeters)
10% gyroid infill (you can try less)
5 top and bottom layers
No supports

On 120% size it is around 190g of filament used (so more than 2022 version, because of the design)

Z-seam set to 'user specified' and set to center so the seam will be on the right side, mostly hidden by hadle