Tanjiro的镰刀

Tanjiro's Nichirin Katana

2023-07-24 17:41:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

After printing Mr. Giedzinski's pirate sword I couldn't help but notice two things: Dang this blade is nice, & secondly, this totally looks like a katana blade. Designing a katana hilt that screws right on to the existing blade seemed like something within my capabilities, so I set forth to bring you this katana remix for Giedzinski's brilliant pirate sword design!

Just like Giedzinski's designs, this remix stays true to the no glue design & can easily be disassembled. Every part can be printed by color if you don't desire painting. I also titled all the hilt parts to loosely match that of a real katana's anatomy.

If you have already printed the pirate sword, then all you need are the hilt pieces, & it will screw right in. However I did make some modifications to the blade pieces to hide the dovetails.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
Normal (0.4)
Infill:
20%
Filament brand:
Sunlu, Hatchbox, Tttyt3D
Filament color:
Silver, Matte Black, Red
Filament material:
PLA, ABS
Notes:
I recommend upscaling all your parts to 110% or 115% for a more accurate size. The model in the pictures is upscaled to 120% & I found this to be a tad too big. You can also see the difference in the blade size between the pirate sword & the 120% upscaled katana above.

Post-Printing

Assembly Instructions

The blade assembly is exactly like the pirate sword, so you can simply reference the source page: https://www.thingiverse.com/thing:5887588

Hilt Assembly Instructions:
1) Insert the Tsuba into the rectangular slot on the Habaki
2) Slide the assembled threaded blade pieces through the Tsuba & Habaki
3) Attach the Fuchi to the threaded side of the Tsuka
4) Slide the Tsuka Ito onto the Tsuka (This is symmetrical, so direction doesn't matter)
5) Cap off the end of the hilt with the Kashira
6) Screw the hilt to the blade
7) Go avenge your fallen family & go on a quest to give your sister her humanity back. Or hang it up on your wall, that works too

Happy Printing!