企业级解决方案J

Enterprise J

2023-06-25 22:24:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Not an easy print, but made it easier. Will still need a large print bed.

So far, I haven't seen anyone attempt to print the Enterprise J. Just looking at it makes it easy to see why. The spindly supports for the nacelles make this difficult. The only way one could hope to print it is to make it large enough that those spindly supports actually are wide enough to hold up the nacelles. I recently got an Anycubic Kobra Max and thought it would make a good print to try various techniques to make this work.

Firstly, sliced the J into sections that made sense to print (using Slic3r). Then, I rotated the parts in Cura to print vertically with a brim for bed adhesion. The rear section is the most risky. If that prints correctly and has enough strength to support the nacelles, the middle and front sections will be worth printing, so print the rear first. I used Cura slicer with the custom supports pluggin to help the front tips of the nacelle bond and hold steady to the bed until they connected to the body.