森奥飞 NSPanel 景观箱体

Sonoff NSPanel Landscape Case

2023-06-23 13:43:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Quick and simple landscape case to hold the Sonoff NSPanel (us).

Prints on its back and the holes are deep enough to handle the long screws that come with the panel. If you do use the long screws you will probably want to drill out the hole to ensure it screws in without damaging the walls. I would strongly recommend finding some shorter ones. Just make sure the heads are small enough to fit inside the indents in the panel.

I opted to use the panels on their own rather than as wall switches. Since most of my lights are already automated I just disabled the relays and can use them to control anything else I want. The display, screensaver gives me time and temperature from my chair in the living room and I can add other pages to control other lights and devices in the house. I used an old 2 prong extension wire and plug to connect the panel.

Quite a bit cheaper than buying the Sonoff one.

I run everything through Home Assistant so I flash any of the devices I can to Tasmota. The NSPanel is pretty easy to do. I then followed these instructions to allow me to customize the pages on the Panel.

https://docs.nspanel.pky.eu/