遥控有机链节模型

Remote Controlled Strandbeest

2023-06-22 13:55:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I was trying to make a walking table model, but I ran into some difficulties while following the instructions (it could just be my printer settings, but I had to design new 3D parts for the contraption to work). I noticed that
1] The original pair of triangle couplets for the crank can easily get disconnected or not turn effectively. So I adjusted the crank couplets and crank to make the structure move more smoothly. I also used glue when I assembled the structure

2] I added a motor holding box, as I intended to connect TT motors to the strandbeest. The base is used to mount 2 TT motors. The lid has space to mount an L298N motor driver chip and an Wemos D1 mini chip (with the ESP8266 library used) for wireless control. There is also space for a 2xAAA battery pack.

3] The lid also has a front and back board with holes. This can be used to install guards on the side so the wires won't get tangled while the structure is moving around. It can also be used to extend the structure and add attachments on.

I am working on writing up an Instructable with detailed instructions. Stay tuned if you're interested!