2020款式ATX电源板支架

2020 ATX PSU Bracket

2023-06-22 13:40:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This replaces the acrylic PSU bracket on my cheap open air 2020 test bench case. The acrylic broke while I was carrying it. I designed this to be super rigid so that it won't break. This is way overdesigned. I iterated using the ATX specification, but it turns out that the stickers on Corsair power supplies are about 0.35 mm on either side. This will at least fit a CX650M and smoothly slide in. The holes are sized for M4 screws. With my T-nuts I needed 10mm. You'll need longer 6-32 screws than come with most PSUs.

If you print it back face down it shouldn't require any supports.

I'm new to SolveSolid, but I tried to make it easily modifiable. I'm including native file for it, STL and STEP.

Warning: In Orcaslicer, the STEP file generates a lot of non-manifold regions. Make sure to click "repair" if you import using that.